Exergy evaluation of the vapor-compression refrigeration cycle at the chemical engineering Laboratory of Carabobo University
Keywords:
Exergy, operation, temperature, efficiencyAbstract
Exergy evaluation of the vapor-compression refrigeration unit was performed operating with R-134a refrigerant, a thermostatic expansion valve, forced convection in the cellar and thermostat in positions 1, 3, 4, 5; getting a smaller decrease of availability and irreversibility and exergy efficiency with the thermostat in the 5th position. It was evident that the compressor and evaporator have high values of exergy destruction due to fluid friction, and a difference in internal heat transfer temperature between air and refrigerant. Greater optimization in unit operation occurs when operating in the 5th position, reaching lower temperatures inside the cooling cellar, in the range of -11°C to -7°C. By means of the second law efficiency, the highest yield was obtained for position 5 (31.40%) and lowest for the 1 (12.13%).
References
Armas, C., Castellanos J., Lapido M. y Alvares M. (2006). Análisis comparativo haciendo uso de criterios de segunda ley de la termodinámica entre dos sistemas de refrigeración por compresión de vapor. Obtenido el día 30 de junio de 2012 http://www.bibliociencias.cu/gsdl/collect/revistas/index/ assoc/HASH0162/c18c74b1.dir/doc.pdf.
Cengel, Y. A. y Boles, M. A. (2012). Termodinámica (7a. ed.). México: Editorial McGraw Hill.
Guallar, P. y De Gracia, M. (2005). Escalas de la energía: La exergía. En Revista Iberoamericana de Ingeniería Mecánica, 9(3), 67-77. Obtenido el día 25 de agosto de 2012 en http://www.uned.es/ribim/volumenes/Vol9N3Nov_ 2005/V9N3A06%20Guallar.pdf.
Herrera, N. y Tejera, J. (2003). Rediseño y construcción de un equipo de refrigeración por compresión de vapor con captura y monitoreo de datos asistido por un computador. Trabajo Especial de Pregrado no publicado, Facultad de Ingeniería, Universidad de Carabobo.
Morán, M. y Shapiro, H. (2004). Fundamentos de termodinámica técnica (2a. ed.). España: Editorial Reverté.
Perry, R., Green, D. y Maloney, J. (1992). Manual del Ingeniero Químico: Tomo III (6a. ed.). México: Editorial McGraw Hill.
Smith, J., Van Ness, H. y Abbott, M. (2003). Introducción a la termodinámica en ingeniería química (6a. ed.). México: Editorial McGraw Hill.
Van Wylen, G. y Sonntag, R. (2003). Fundamentos de termodinámica (2a. ed.). México: Editorial Limusa.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Alberto Martínez, Viky Mujica

This work is licensed under a Creative Commons Attribution 4.0 International License.